Unconfigured Ad Widget

Collapse

Muzzle clean up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mark501w
    Senior Member
    • Apr 2011
    • 1699

    Muzzle clean up

    Got this .223 barrel need to knock off the machine marks to dress it up, without tearing rifle down.
    Last edited by mark501w; 06-19-2014, 10:27 AM.
  • #2
    hermosabeach
    I need a LIFE!!
    • Feb 2009
    • 19574

    Do you want it mirror finished from the outside edge of the barrel to the bore or do you just want to clean up the crown?
    Rule 1- ALL GUNS ARE ALWAYS LOADED

    Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)

    Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET

    Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
    (thanks to Jeff Cooper)

    Comment

    • #3
      kcstott
      I need a LIFE!!
      • Nov 2011
      • 11796

      I would suggest very fine tool makers stones. i.e 400 to 600 grit Giesswein EDM blue. Used very carefully as to not damage the crown. Then scotch bright to even out the lines. These stone cut fast hold their shape but don't remove to much material. they are great for cleaning up a surface without changing the dimensions to much.

      Ideally you would want to remove the barrel from the action and set it up in a lathe. Now there are always Mason's tool too. he makes a very nice no lath crown tool the work better and faster then a lathe. Problem is you get what you pay for and his tools are not cheep

      Comment

      • #4
        mark501w
        Senior Member
        • Apr 2011
        • 1699

        Don't want a mirror finish just want to match it. mason's tool just look up the name?

        Comment

        • #5
          mark501w
          Senior Member
          • Apr 2011
          • 1699

          Nice tool if I was going into the crowning bizz I'd buy it

          Comment

          • #6
            hermosabeach
            I need a LIFE!!
            • Feb 2009
            • 19574

            Premier supplier of chamber reamers, headspace gauges, and gunsmithing tools. Made in the USA. Trusted by Colt, Ruger, and top PRS shooters.




            the catalog




            Rule 1- ALL GUNS ARE ALWAYS LOADED

            Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)

            Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET

            Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
            (thanks to Jeff Cooper)

            Comment

            • #7
              hermosabeach
              I need a LIFE!!
              • Feb 2009
              • 19574

              The Military version



              Rule 1- ALL GUNS ARE ALWAYS LOADED

              Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)

              Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET

              Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
              (thanks to Jeff Cooper)

              Comment

              • #8
                mark501w
                Senior Member
                • Apr 2011
                • 1699

                thanks

                Comment

                Working...
                UA-8071174-1