DPMS 308

[CNCGuy]

after hours and days of searching for a DPMS 308 print finally came across one at rifleconnection.com for ten bucks, hard to beat that price. Looks legit, I took measurements from a real DPMS 308 and compared it, seemed dead on.

[CNCGuy]

Here is the actual link if anyone is interested

http://rifleconnection.com/index.php?main_page=product_info&cPath=4&products_id=3

[vw69turbobug]

http://www.cncguns.com/downloads.html not a dpms but still has the same measurements as a dpms only different is the radius at the end next to the buffer tube... and its free. i think i have a dpms print in my collection that i got from a torrent site, ill see if i can find it

[CNCGuy]

The magazine layouts and mag angles are different as well. @VWturbo yours seems to be the Armalite version of the AR-10 if i'm not mistaken? Great resources though!

[Rusty Scabbard]

From what I've read, the FCG parts used in 308 lowers are the same as an AR15. FCG pocket, selector hole, trigger and hammer pin locations should then be identical to an AR15. The discrepancy is the location of the whole group relative to the takedown pins. Couldn't you use the selector detente hole as a reference point, since it's already drilled in the 308 paperweight ?