Unconfigured Ad Widget

Collapse

AR QUESTION

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 8sorbust
    Junior Member
    • Dec 2007
    • 28

    AR QUESTION

    On the front push pin hole of the lower , what should the minimum thickness of the metal be . I have seen some as thin as .047 on the forward edge and that seams thin . THANKS
  • #2
    kcstott
    I need a LIFE!!
    • Nov 2011
    • 11796

    I've never worried about it. On the 10% receivers i've done I referenced everything off the mag well until I got the take down holes in place then referenced off those. The wall thickness was what ever it was.

    Comment

    Working...
    UA-8071174-1