Tweet
Hi all, im having a little problem with this .22 conversion kit, each time i fire the bullet doesnt eject im not entirely sure why. If its a common problem or something wrong with the part i have. All help is much appreciated thanks.
-
There are few of us that can easily surrender our belief that society must somehow make sense. The concept that the state has completely lost it's mind is intolerable, therefore the evidence has to be denied. -
Sounds like an extractor problem... Have you checked to see if the extractor looks broken or is under no spring pressure?Originally posted by BannedinBritain -
clean the crap out of the bolt oil the hell out of the bolt and make sure to clean the gas port cause .22lr is very dirty and will clog your small hole at the front of the port. Then try again and let us know what happens!sigpic
Originally posted by WAMO556Comment
-
I have found on mine the extractor doesn't really catch shells 100% of the time, it varies with ammo brands. Also make sure your bolt and the chamber adapter is closing correctly, Had a problem with mine, this might be causing you problems also.
Does the fired case look ok when you look at it
croc4Comment
-
Thanks very much for all the info and help guys, i dissembled and cleaned it properly but i havent had chance to fire it again. As soon as i get around to it ill post what happens.
Cheers.There are few of us that can easily surrender our belief that society must somehow make sense. The concept that the state has completely lost it's mind is intolerable, therefore the evidence has to be denied.Comment
There are currently 25738 users online. 116 members and 25622 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment