sks trigger group

[rebel1]

I have an sks trigger group that I have had apart and back together quite a few times with no success working the hammer. I had my other trigger group apart and it looks to be together correct. Can someone assist? Thanks

[stitchnicklas]

safety on?

[rebel1]

On or off it will not trip the hammer. I have another trigger group in parts and have tried to change the parts with the same results.

[jamesob]

There is a bar that sticks up at an angle wich has to be at the correct position for it to fire. That bar rides on the bottom of the bolt to allow the thing to fire.

[jamesob]

It's called a bolt follower disconnector

[rebel1]

I will check it out and keep y'all posted. Thanks for the advise.

[rebel1]

OK, pulled it apart tonight and put it back together and now it is working. It seams as i put the clip in piece over the trigger so it was not pushing the sear. Now back to the reason I took it apart in the first place, the trigger really drags! Any thoughts or suggestions? Thanks

[kdshooter]

I'm having a similar problem except it works sometimes and not other. Then it becomes a mystery if and when it will fire again. I have pulled the trigger group cleaned and oiled it and seems to operate properly. I'm beginning to the the disconnector is hanging up when in the rifle is assembled. I found a video which is not great, but it does show how to get the hammer to come forward. Any ideas? thanks

http://www.youtube.com/watch?v=KpiIzS0gWFw

[rebel1]

same video I watched and that was my problem. Try to find another video.

[bohoki]

it wont drop the hammer even in the gun?

[rebel1]

Ok, took it to the range, loaded, racked it back and feel the trigger drag, it fires and chamber but when I pull for the next round there.is nothing! The trigger pulls back and nothing. I'm tired of screwing with it. Does anyone know someone local or where I can ship it to for help or if somone has a trigg group laying around. Thanks

[bohoki]

Ok, took it to the range, loaded, racked it back and feel the trigger drag, it fires and chamber but when I pull for the next round there.is nothing! The trigger pulls back and nothing. I'm tired of screwing with it. Does anyone know someone local or where I can ship it to for help or if somone has a trigg group laying around. Thanks

local?

[rebel1]

Fallbrook

[tujungatoes]

Does anyone know someone local or where I can ship it to for help or if somone has a trigg group laying around. Thanks

Send it to Kivaari

[bohoki]

this video explaine to me how to fix my horrible trigger

http://www.youtube.com/watch?v=cryTMAqLuxM