Unconfigured Ad Widget

Collapse

*UPDATE* AR- Fail to eject every round

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jackdhammer
    Member
    • Sep 2012
    • 162

    *UPDATE* AR- Fail to eject every round

    This is my first AR, so any advice you can offer is appreciated.

    300blackout

    Here's the skinny,
    Bought a complete upper at gun show. It consisted of:
    Y/M BCG
    unknown HBAR barrel
    unknown low pro gas block and carbine length gas tube.

    Switched parts to Nemo Nitride light barrel
    regular profile gas block and same gas tube.

    Worked great before. Wanted to change handguard and barrel for different look and lighter weight.
    First trip to range after having upper put together by RifleGear and it fails to eject. It looks like it partially extracts the spent shell because the new round gets jammed in with the case.

    Any Ideas?
    My first thought was the gas port might be different (smaller) on the new barrel? But like i said, this is all very new to me.
    thanks for looking!
    Last edited by jackdhammer; 04-06-2013, 9:37 AM.
  • #2
    jsipe007
    Member
    • Mar 2012
    • 447

    Sounds to me like it could be an under size gas port or out of spec gas block (unlikely but possible). Those are the only two items you changed correct? You could try putting the old low pro gas block back on to see if it fte's then the barrel is most likely the culprit.

    First though I would check gas block alignment. Even the slightest misalignment can cause fte

    Sent from my DROID RAZR HD using Tapatalk 2
    Last edited by jsipe007; 03-28-2013, 11:39 PM.

    Comment

    • #3
      ar15barrels
      I need a LIFE!!
      • Jan 2006
      • 57202

      Originally posted by jackdhammer
      Any Ideas?
      My first thought was the gas port might be different (smaller) on the new barrel?
      That would do it.
      Measure both gas ports and report what you find.
      Or, just come see me and I'll fix it.

      It could also be an assmbly related problem...
      Randall Rausch

      AR work: www.ar15barrels.com
      Handguns: www.handgunbarrels.com
      Bolt actions: www.700barrels.com
      Foreign Semi Autos: www.akbarrels.com
      Most work done while you wait on a scheduled shop visit.

      Comment

      • #4
        jackdhammer
        Member
        • Sep 2012
        • 162

        Well I got it worked out.
        I got a good referral from one of the rangemasters at my range (Field Time in stanton. Cant say enough good things about them) to a small shop in Aneheim/Orange called Soutcoast Armory.
        I talked to Ric, he really knows his stuff. Turns out the barrel had a bur on the outer edges of the gasport from when they drilled it. When I had it assembled by Riflegear, they grooved out the gas port instead of filing down the bur. So it was just shooting gas down groove. It might not have been an issue (except for maybe a poor decision on a solution) with a 223/5.56 but the 300 tends to be a bit picky on gas, especially if I want it to cycle subsonic.
        Well Ric replaced the gas block and filed down the bur.
        Shoots like a dream again.
        I would highly recomend anyone in Orange County go to them for any AR work you need done. Great shop, Great guys.

        Comment

        Working...
        UA-8071174-1