Gunsmith in San Diego

[Boxkicker]

Looking for a gunsmith to bed and pillar bed a Remington 700 SPS to a new stock.

[kcstott]

Duncans
San Marcos.
Trusted, reliable, but they usually take a while to finish a job.

[Hoopty]

+1 on Duncan's... KCstott is right on the money about a wait. I turned a30-06 in for gun smithing.. Got it back 6 months later.. Fwiw

[kcstott]

6 months is quick. I dropped off a mauser there years back to get a scope mounted. 18 months to get it back. They are much faster now.
The thing is they are very much worth the wait.

[Boxkicker]

Thanks. I'll go visit Duncan's.

[Flintlock Tom]

Don Gussler in Santee.

http://gusslers.com/

[Boxkicker]

Last I talked to Don he was pretty backed up.

[wdsonny]

AJS Firearms Limited.
Tony Sandru
760-310-0610
tonysandru@yahoo.com

Good guy, works from his home, knows his stuff. San Marcos.

[Gunsmith Dan]

AHH ....

no don't call me too busy on the Cerakote side to do bedding atm

BUT

before you go spending hundreds of dollars on bedding and pillar bedding first install the action in the new stock and SHOOT IT!!!!!

If you are getting mechanical rest groups of under 0.75 MOA at 100 yards you will waste your money, unless you are wanting a 1000 yard competition rifle then spend the money. That of course is if you do not see any loose fit in the action area or the barrel touching the stock.