0% AR lower?

[DULLYJAY]

You guys know of any one or where I can get this turn into a 80%? TIA

[uxo2]

Try vaderspade.

[Google it Research]

Sounds like too much work.

[bill_k_lopez]

0% lower

[bigcalidave]

Sorry, do you have forgings that you want to turn into 80%s? That's a LOT of work. You get to do it yourself

Here's some links

http://www.cncguns.com/projects/ar15lower.html

http://www.lecreg.com/P4x4/ARblank.pdf

[nothing4u]

0% lower

[DULLYJAY]

I guess this is a 10% lower. SMH

[DULLYJAY]

Sorry, do you have forgings that you want to turn into 80%s? That's a LOT of work. You get to do it yourself

Here's some links

http://www.cncguns.com/projects/ar15lower.html

http://www.lecreg.com/P4x4/ARblank.pdf

Thx 4 links.

[DULLYJAY]

Sorry, do you have forgings that you want to turn into 80%s? That's a LOT of work. You get to do it yourself

Here's some links

http://www.cncguns.com/projects/ar15lower.html

http://www.lecreg.com/P4x4/ARblank.pdf

Thx 4 links.

[nothing4u]

Build pics! Let us know how the project goes.

[VaderSpade]

Try vaderspade.

I've done a couple on my manual mill. They took about 8 hours each.

[DULLYJAY]

To much for me to handle. More so having no tools. Thx all. Off to the sale forum. VaderSpade PM'ed u.

[HOESAYE559]

Sounds like too much work.

True that! But if you got the set up imagine the bank you can make right now making 80% lowers pssh be Rollin in the money!

[Joewy]

To much for me to handle. More so having no tools. Thx all. Off to the sale forum. VaderSpade PM'ed u.

I know a guy who did a 0% with a drill press and a dremmel.
It took him about a month working for a little after work and a few weekends.
It looked good thou.

[kcstott]

I did two that were only decked and broached
took a damn long time to finish. building fixtures was time consuming as well.