Kit to match AK blank

[11b]

Saw these on sale ... Anyone know anything about them or what kit i could use with it?

http://www.sportsmansguide.com/net/cb/akm-akms-receiver-blank.aspx?a=1003555

thanks

[munkeeboi]

romy g, egyptian, polish, russian...almost any fixed stock 47 kit would work

[CptDan]

These need to be heat treated before assembly.

[valley82]

Trigger pin holes need to be heat treated, can be done with a turbo torch.

[Carsgunsandchics]

Good luck if you try and get one from them into Cali. They don't seem to care that we too are Citizens. We are on their restricted shipping list as well as Cheaper Than Dirt.

[valley82]

Ak-builder.com 80% blanks. They will sell to Californians all day every day.

[anthonywwalker]

From the pics they have on the site, it looks like the rails are already installed, but damned if I couldn't see an ejector tip sticking out anywhere. Thoughts?

[timdps]

Looking at the enlarged photo of the bottom of the receiver, it does not look like there are any rails in there.

[anthonywwalker]

Looking at the enlarged photo of the bottom of the receiver, it does not look like there are any rails in there.

Yeah, that was what was confusing me, looking at the blowup of the top view, there's certainly another rail below the top rail, but no ejector tip

[Jeepers]

look like a polish one to me and i see nothing but the top rail in those pics, there is no inner rails ...and i dont care what they say they are not "a rare find" and can be found cheaper ....

[anthonywwalker]

ahh, I'm losing it, the way the pic was laying, I was mistaking the indentation for another set of rails below the top rail, the larger photo makes it easier to see. Guess its time for my annual eye exam

[Ub3rD0rk]

Unless you do a full heat treat, you will end up VERY disappointed. These blanks are made from 1050 steel, not 4130 like AK-Builder flats. Spot heat treating will not work, unless you don't plan on shooting it.

[11b]

wow good info thanks guys

[hellayella]

www.childersguns.com will do the heat treating of all the Polish 80% blanks with rails...go to AKfiles for more info