Unconfigured Ad Widget

Collapse

Sig 522 FTF

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fuentes_david
    Junior Member
    • Dec 2011
    • 27

    Sig 522 FTF

    I have had my sig for couple of years and have shot many bulk ammo near 6-8,000 rds. Now all of a sudden, it had feeding problems, sometimes the 3/4 round i would pull the trigger an nothing, no light primer strike either. I replaced the recoil spring thinking it might need more force to reset the trigger. Now, every round i need to load by charging handle only. I figured so of you more familiar could please help. You may not have the same rifle, but any problem may be similar in other setups? Also the last thing i was going to do is maybe change out the spring on the hammer, but idk? Please help, Thanks in advance,
    David
  • #2
    Gunsmith Dan
    Senior Member
    • Apr 2012
    • 1445

    Have you thourghly disassembled the firing pin assembly and cleaned out the firing pin cavity??? IF enough gunk gets in there it can prevent the firing pin from moving freely since you are not even getting primer strikes.

    Comment

    • #3
      fuentes_david
      Junior Member
      • Dec 2011
      • 27

      From what i believe, trigger does not reset.

      Comment

      • #4
        fuentes_david
        Junior Member
        • Dec 2011
        • 27

        BTT

        Comment

        • #5
          epilepticninja
          Veteran Member
          • Aug 2010
          • 4166

          Mine does FTF's with crappy ammo. I've been using CCI, and no issues.
          Former political prisoner who escaped on 9-24-23.

          Comment

          • #6
            fuentes_david
            Junior Member
            • Dec 2011
            • 27

            BTT
            mine cycled them fine at first, just trigger won't reset.

            Comment

            • #7
              nothinghere2c
              Senior Member
              • Mar 2012
              • 2259

              Originally posted by Gunsmith Dan
              Have you thourghly disassembled the firing pin assembly and cleaned out the firing pin cavity??? IF enough gunk gets in there it can prevent the firing pin from moving freely since you are not even getting primer strikes.
              this has happened to me with a couple firearms

              Comment

              • #8
                uxo2
                Veteran Member
                • Dec 2008
                • 4003

                22s are dirty ......Blow back everywhere.
                Only two defining forces have ever offered to die for you,
                Jesus Christ and the American Soldier.
                One died for your soul; the other for your freedom.
                George Patton

                Comment

                • #9
                  fuentes_david
                  Junior Member
                  • Dec 2011
                  • 27

                  I think i need to rephrase it, the only way it cycles another round by manualy pulling the charging handle .

                  Comment

                  • #10
                    Gunsmith Dan
                    Senior Member
                    • Apr 2012
                    • 1445

                    but can you pull the trigger freely and easily or do you have to pull extremely hard to get it to move?

                    If it pulls easy but does not reset it can be either a spring issues or again back to dirty gunk causing the trigger not to move to it full forward and full back positions.

                    Comment

                    • #11
                      fuentes_david
                      Junior Member
                      • Dec 2011
                      • 27

                      yeah i have to check it the next time i have time to go to the range ima dry to load one by charging and after study whether or not it was able to fully reset the trigger , by breaking it down after that first shot but in the mean time THANKS for all the ideas, ill keep you guys posted when i get a chance, and once again thanks.

                      Comment

                      Working...
                      UA-8071174-1