AK 74 FSB

[bodiebill]

I have a Bulgarian AK74 kit. The barrel was cut and the stubs need removed
from the front sight base, Gas Block and RSB.
Any tips or procedures for pressing the stub out?

[fxjets]

Standard pressing blocks/press. If you dont have any, a AR wrench/press works well. The side cutouts work for each of the parts.

[Datdarkness]

^^^ Dremel till smooth so it does catch on anything then tap.
I used the AR tool as well, worked perfectly.

[SJgunguy24]

Screw it down to something solid to get the pins out. Use a big stubby punch with the head ground down to the pin size.
I use a vise and a 1/2" X 4" long carrige bolt and a hammer.