Unconfigured Ad Widget

Collapse

Rusty chrome lined barrel.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ElectronWrangler
    Member
    • Jun 2010
    • 297

    Rusty chrome lined barrel.

    Just pulled a build out of the safe that was built from an AK Builder Romy kit with a populated chrome lined barrel. And the inside of the barrel is rusted.

    Is this normal?

    I parked the rifle at the build party, then soaked the kit in 30 weight oil for a week after and once a day I flipped the kit in the oil and poured oil down the barrel.

    Shouldn't a chrome lined barrel not rust?
    EW

    WTB: .223 Saiga Bolt Head Assembly
  • #2
    sffred
    Senior Member
    • Jun 2010
    • 2421

    If you shoot corrosive everything rusts. Is there moisture in your safe? I like to use baking soda, silica packets, and moth balls in the safe to keep moisture away

    Comment

    • #3
      AKNupe
      Junior Member
      • Oct 2012
      • 20

      What if you've never fired it? I've got the same thing but its been less than a week since the BP. I know mine is because I parked so late in the day so moisture was in the air and I let it sit after I used the brake cleaner when I blasted. I'm not worried about the rust. What can I get it off with? Any suggestions?

      Comment

      • #4
        kcstott
        I need a LIFE!!
        • Nov 2011
        • 11796

        It's probably left over iron deposits from parking, it's a residue in the barrel. Remember the steel wool to condition the bath? You think a few flecks of steel settled in your barrel and started to rust?
        This can happen if it's not properly rinsed of solution before the oil soak.
        Clean the bore as normal with a good copper solvent and see what happens. Betcha the rust is gone.

        Comment

        • #5
          Grizzled Bastard
          Member
          • Nov 2012
          • 212

          JB Bore Paste.

          Comment

          • #6
            Grizzled Bastard
            Member
            • Nov 2012
            • 212

            JB Bore Paste.

            Comment

            • #7
              kcstott
              I need a LIFE!!
              • Nov 2011
              • 11796

              Originally posted by Grizzled Bastard
              JB Bore Paste.
              That'll work too.

              Comment

              • #8
                bigbob76
                Veteran Member
                • Dec 2007
                • 3955

                Firing a pile of ammo can work wonders too. Even if you Parkerize a non chrome lined barrel a pile of ammo will make it shiny again if I remember correctly. It's recommended to plug the barrel and gas block when Parkerizing a non chrome lined barrel but the plugs often pop out in the hot solution it seems.
                If you can't explain it simply you don't understand it well enough. Albert Einstein

                Comment

                • #9
                  Gunsmith Dan
                  Senior Member
                  • Apr 2012
                  • 1445

                  Chrome is not a rust proof coating by itself, it is to porous. In order to prevent rust forming on the metal under the chrome it needs to be copper plated and/or nickel plated then chrome plated.

                  If you see rust in a chrome lined barrel most likely the they went cheap and only chrome plated without the other metals. It could also be a illusion and something else is giving off the red color making it look like rust.

                  Comment

                  Working...
                  UA-8071174-1