L1A1 build

[kcstott]

Just took in a Primo L1A1 kit on trade for labor. Now I need an inch receiver. A good inch receiver. I've seen DS arms and that may be the route I will have to go. Coonan seems like good stuff and less expensive. Imbels are out of the question and the rest is supposed to be junk or near junk.

I don't mind converting a Metric receiver to inch I'd just rather not do it.
I don't plan on having this thing together for at least six month to a year with all the 922R parts I have to source.
I'm going to put IWD furniture on it in english walnut and a featureless build. That would take care of five of the seven compliance part I need to source. So two more parts to go.

Any suggestions on where to find a good receiver and a shop that will DROS one local to the San diego county?
the .308 bug has bit me pretty bad and if I could I'd have this thing together tonight.

[jamesob]

I built mine on a imbel and they are worth the money.

[mrlonewolf]

I built mine on a imbel and they are worth the money.

^^^ Yup.

[kcstott]

From what I can tell they are near impossible to get. or at least anywhere near a reasonable price. I just cant see spend that kind of money. DS Arms is not exactly cheep. I guess the AK's and AR's spoiled me on price. I think I'm going with a coonan.

[Bolillo]

From what I can tell they are near impossible to get. or at least anywhere near a reasonable price. I just cant see spend that kind of money. DS Arms is not exactly cheep. I guess the AK's and AR's spoiled me on price. I think I'm going with a coonan.

Coonan had, and maybe still does, long delivery times. No problem if you're not in a hurry.

If you want one sooner, there's a seller on GB named "Parsi" that has NOS Imbels (metric). Going to cost you 4 bills + to win one of his auctions.

[kcstott]

Coonan had, and maybe still does, long delivery times. No problem if you're not in a hurry.

If you want one sooner, there's a seller on GB named "Parsi" that has NOS Imbels (metric). Going to cost you 4 bills + to win one of his auctions.

Found him thanks

[-hanko]

I'd suggest getting a metric receiver and not convert it to inch.

Metric mags are cheaper.

Very few people will be able to tell the difference between the Imbel and an inch receiver anyway.

The Brit barrel will need a breeching washer to headspace correctly, but that's about it.

If you want the Inch receiver, I'd haunt the FAL Files and be ready to pounce hard when you find one.

hth

-hanko

[thedrickel]

I would order an inch receiver from DSA for 350. The last 2 I got a couple months ago looked exactly like the ones I got 2-3 years ago, not like the new production metrics with different cuts and fonts and whatnot.

[adamsreeftank]

I remember seeing a pair of new Imbel receivers for $300 in the for sale section ages ago. I still kick myself for not grabbing them. Those were the days.

[kcstott]

I would order an inch receiver from DSA for 350. The last 2 I got a couple months ago looked exactly like the ones I got 2-3 years ago, not like the new production metrics with different cuts and fonts and whatnot.

Where did you find one for $350??
I see a list price of $475

[kcstott]

Also the only area that I was going to convert to inch was the charging handle slot and the dust cover. I was going to leave the mag well alone.

[falbuff]

Falfiles members get a discount with dsa.

[kcstott]

That's a hell of a discount. Dsa it is then.

[jamesob]

You can buy a imbel inch receiver, I know I did.

I'd suggest getting a metric receiver and not convert it to inch.

Metric mags are cheaper.

Very few people will be able to tell the difference between the Imbel and an inch receiver anyway.

The Brit barrel will need a breeching washer to headspace correctly, but that's about it.

If you want the Inch receiver, I'd haunt the FAL Files and be ready to pounce hard when you find one.

hth

-hanko

[kcstott]

You can buy a imbel inch receiver, I know I did.

Yeah but two things

One they are over priced, I see no collector value in an FAL, This rifle is going to be a shooter not a safe queen.

the other thing is if I get a US made receiver it's one less 922R part i need to worry about and with the high cost of compliance parts that not a bad thing.

If I can get a DS Arms for $350 I'm good with that. I just can't see spending $600 on a receiver at that rate it's not worth building to me.

I'm beginning to think all this Gun Legislation is nothing more then a way to drive up the cost of parts and in turn increase the sales tax taken in on every sale.