Unconfigured Ad Widget

Collapse

Ar headspacing question...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Slick4_2_0
    Junior Member
    • Aug 2012
    • 85

    Ar headspacing question...

    Hi, I'm building a stripped ar upper with the barrel and bcg from different makers. My ? Is do I need all 3 headspacing gauges( Go-gauge, no-go gauge, and field gauge) to make sure my headspacing is correct and the upper is safe to shoot? Thank you your knowledge and help is greatly appreciated
  • #2
    G-forceJunkie
    Calguns Addict
    • Jul 2010
    • 6534

    Just a go and no-go is fine. That is the minimum and max headspace you want to start with.

    Comment

    • #3
      Duranimal
      Senior Member
      • Jun 2011
      • 1062

      So if one puts together a upper with a barrel and bcg set are they good to go???
      "I'd much rather go to my grave never needing my gun, than go there wishing I had it"

      Comment

      • #4
        kcstott
        I need a LIFE!!
        • Nov 2011
        • 11796

        Head space is pre-set on 99.99999% of all AR's. That said if you mix and match manufacturers there is going to be some variance. But the locating surfaces on the barrel and receiver are machined to tight enough tolerances that in all but a case of manufacturers defect you can assemble a functional upper.

        Now after all the blather you still should check and confirm head space on every rifle you build.

        Comment

        Working...
        UA-8071174-1