Tweet
Hi, so I recently finished a conversion for my Saiga 7.62x39mm. There is a problem though: my bolt carrier seems to be slamming into my hammer face, locking the action up. I have to force the gun into battery manually.
A Google search revealed that one other person had a similar problem:
Before you ask, parts involved:
-Tapco retainer plate
-Tapco G2 trigger group
Everything else is from the factory or doesn't figure into the problem.
And yes, I did install everything in their original positions a la retainer pins. And I did shave 1.5mm off the right side of the hammer's base to admit a BHO.
Two questions:
1) Is this a common problem?
2) Is there a solution to this problem?
2a) Should I file/grind down the hammer a bit?
2b) Should I use the factory hammer?
A Google search revealed that one other person had a similar problem:
Before you ask, parts involved:
-Tapco retainer plate
-Tapco G2 trigger group
Everything else is from the factory or doesn't figure into the problem.
And yes, I did install everything in their original positions a la retainer pins. And I did shave 1.5mm off the right side of the hammer's base to admit a BHO.
Two questions:
1) Is this a common problem?
2) Is there a solution to this problem?
2a) Should I file/grind down the hammer a bit?
2b) Should I use the factory hammer?
Comment