80% AK47 Receiver Blue Prints?

[NotEnoughGuns]

I'm Trying to find drawings for hole locations and sizes for an 80% bent AKM receiver. Any one have any leads?

[Heatseeker]

Here's a PDF that I used as a reference for my first build.

[nicoroshi]

Scroll to bottom

[Eldraque]

what is an "80% ak" mean?

[NotEnoughGuns]

Here's a PDF that I used as a reference for my first build.

This one looks pretty good. Can anyone confirm that the dimensions are correct?

ETA: This is for a Romanian build on a 1mm receiver.

[killathrilla]

...

[kcstott]

This one looks pretty good. Can anyone confirm that the dimensions are correct?

ETA: This is for a Romanian build on a 1mm receiver.

I can confirm that they are incorrect but close.

Now that is not to say that it didn't work for the guy that drew it.

The issue is AK trunnions were built in many different countries on many different fixtures and out of the dozens I've seen none match up anywhere near exact.

So what I'm getting at is the print is not necessarily wrong it's that the AK's are just so damn different.

The cutting tools the trunnions look like they were cut with look like wood working tools. I've only seen worse tool marks once and that was on a Mosin.

[nicoroshi]

Agree with kcstott on the tunnion hole locations as he states that there is variance from trunnion to trunnion.
Best to get that hole layout from the specific trunnion you're using.
The axis pin holes, center support, safety selector, and trigger hole locations on the other hand are GTG IMHO on Dr.Strangelove's print.

[kcstott]

Yeah I guess I should have been clear on that. As far as I can tell the axis holes are GTG.

[NotEnoughGuns]

Thanks Nico and KC, those are the holes I was concerned about.

[savagemann]

Scroll to bottom

Great link Nico.
I just bookmarked that one.
I think it will come in handy soon.

Sent from my SCH-I510 using Tapatalk 2

[nicoroshi]

Great link Nico.
I just bookmarked that one.
I think it will come in handy soon.

Sent from my SCH-I510 using Tapatalk 2

You're welcome bro.
That's my friend Moab's site.
Tried to pull up Pookie's webpage but for some reason it appears to be down

[Flintlock Tom]

what is an "80% ak" mean?

It's an AK receiver that is not 100% complete so the ATF does not consider it a firearm. You can buy all parts "over the counter", (or over the internet) and assemble your own rifle.
The 80% receiver still requires some bending, drilling, reaming and riveting to turn it into a rifle.