Homemade extended muzzle device.

[1lowluv]

Bought an AMD kit with a 12.5 barrel from AK-builder and ordered a fake can from FTF industries, took it out shooting and at 25 yards couldn't even get on paper. Messed with the sights about 10 min and still nothing. Aimed a foot to the left of the target and hit it right in the center. Hmmm! Cleared the gun and took out the bolt carrier, held the barrel up to the sun and I'll be damned, the barrel is bent.

I email Curtis and he says send it back and he will replace it. I manage to get the can off so I can send it back and look through the barrel again and it looks straight. Hmmm again. Slowly thread the fake can on and notice it is threaded crooked. Look through the can and notice the trail. the bullet was riding along the wall of the can and shooting crooked.

I email Curtis again and let him know the barrel is fine. Go to order an extended AMD brake and no one has one. Ordered theis Russian thing from cnc warrior thinking it will be long enough, nope, stupid me.... Didn't account for the threaded part of the barrel being inside the brake. Now I'm like 3/4" too short. Cut a piece of pipe and welded it to the end and dremeled the weld smooth. Not too bad.

It will work and I'm legal. It's perm attached. Kinda looks cool

[hypnoman]

nice job!!

[MUKAK]

yes it is!

nice job!!