Unconfigured Ad Widget

Collapse

WOA barrel nut problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vhag
    Member
    • Jul 2011
    • 232

    WOA barrel nut problem

    hi guys, does any body know how i can take off the barrel nut from a WOA barrel? i try to use the stock tool but couldn't do it here is a picture
    Last edited by vhag; 08-05-2012, 9:04 PM.
  • #2
    dlewis7
    Junior Member
    • May 2009
    • 61

    Yeah.... You need a spanner (also called a pin) wrench to remove that. I believe 1 1/4" is what you'll need. You should be able to find one on amazon (use the shop42a link)

    Comment

    • #3
      dlewis7
      Junior Member
      • May 2009
      • 61

      PS: your barrel will be "glued" into the upper receiver w/ retaining compound once you remove that barrel nut. If it doesn't just pull right out, that's why. I had to tap it out (gently w/ something soft that won't damage the barrel). Good luck!

      Comment

      • #4
        vhag
        Member
        • Jul 2011
        • 232

        thank you, i won't be removing the barrel just want to use different barrel nut for a railed free float

        Comment

        • #5
          dlewis7
          Junior Member
          • May 2009
          • 61

          No problem.

          Do you have an upper receiver block to mount it in? You'll need one. That nut is on there pretty tight from woa.

          Comment

          Working...
          UA-8071174-1