when i finally get the correct headspacing for my ak74. is in mandatory to use an oversized barrel pins. ir can i just retap the trunnion and hole to clean it up and then slide the original barrel pin in? thank you. i have been debaiting this the whole weekend
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
headspacing a ak74 question
Collapse
X
-
If you are using a barrel that already has a barrel pin groove cut in it and it is not a numbers matching kit or was not previously head spaced you need to use an over size pin.
The forces involved will cause the barrel to shift position.
If you have a virgin barrel you can headspace it, ream it and reuse the exsiting barrel pin. -
thank you kcstott. yeah thats what i figured. i have a matching front and rear trunion. but the barrel is new. its actually a brand new bulgarian ak74 barrel that came with the kit. it has the barrel notch already there. the kit came from what a country. so it's looking like i need to buy an oversized barrel pin.Full AK Heat Treating
and Parkerizing ServiceComment
-
CGSSA Director - C3 Leader & Regional Gun Show Booth Coordinator (LA/OC/IE)CGN Contributor - Lifetime- Jul 2008
- 3980
I do not recommend that approach at all.
Play it safe.Would you like to participate in the Right to Keep and Bear Arms movement in California?
Please visit the Calguns Community Chapter forum for your area and sign the roll call
California needs YOU.
sigpic
Prepare for the unknown by studying how others in the past have coped with the unforeseeable and the unpredictable. George S. PattonComment
-
Well lets just say that there was a very long thread and to put it mildly I don't use live rounds to headspace anything. It's just not a good practice when you are not in wartime conditions. Will it work? Probably. Is it the correct way to do it? Nope. Would a Self respecting Gunsmith allow a firearm out of his shop head spaced that way? Nope.
I'd find someone with the gages and get it done correctly. I saw your other post for the trade offerComment
Calguns.net Statistics
Collapse
Topics: 1,863,414
Posts: 25,105,768
Members: 355,945
Active Members: 4,939
Welcome to our newest member, glocksource.
What's Going On
Collapse
There are currently 8407 users online. 126 members and 8281 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.

and spam
Comment