Unconfigured Ad Widget

Collapse

Stoeger 2000 carrier keeps blocking bolt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hundy
    CGN/CGSSA Contributor
    CGN Contributor
    • Jun 2013
    • 550

    Stoeger 2000 carrier keeps blocking bolt

    Hello, I have a Stoeger 2000 that I am trying to help a friend fix. The carrier pops up and blocks the bolt every time the bolt release is pressed. It gets stuck there. It is bugging me because I cannot figure it out. If anyone has any experience with the issue, I would really appreciate some advice.

    Thank you,

    Jay
  • #2
    john323
    Member
    • Jan 2007
    • 399

    1st thing is to check the carrier plunger and spring. Also check the area where they engage
    johnsgunsmithing@live.com

    Southern California
    Anything legal Rifles , Handguns , Shotguns and Black Powder

    Comment

    • #3
      hundy
      CGN/CGSSA Contributor
      CGN Contributor
      • Jun 2013
      • 550

      Originally posted by john323
      1st thing is to check the carrier plunger and spring. Also check the area where they engage
      Hello, I did check the carrier plunger and spring and rear of bolt where they engage. I cleaned and lubricated the inside of receiver and all the parts within. I ordered and tried to replace the carrier latch and its pin and springs. Did not help actually made it worse as bolt would not lock reward. I found that the newly ordered carrier latch and pin had a slightly larger diameter than original. The picture shows what happens every time the bolt is released, the carrier pops up and blocks it. This even occurs with a cartridge in the magazine. It's been very frustrating. Any help or advice is greatly appreciated. Thank you.

      Jay IMG_4222.jpg

      IMG_4222.jpg

      Comment

      Working...
      UA-8071174-1