Does any one make an increased power ejector spring for an AR-10?

[problemchild]

AR-10 308 AR-10 308 <<<-------------

NOTE this is EJECTOR spring not extractor and this is 308 NOT 223!!

I have a single ejector bolt and a dual ejector bolt AR-10 308 AR-10 308 . The single is a spare and it lacks the brass kick out that the dual ejector bolt has. The brass kind of flounders in the opening and barely falls a foot from the gun. The dual ejector bolt flings the brass in a nice neat pile 7 feet away and 3pm position.

I am just looking for an increased power ejector spring for the spare bolt to see if it solves the issue. Nothing else right now...

AR-10 308 AR-10 308

[Arisaka]

I would try Wolff gunsprings. www.gunsprings.com

[problemchild]

I would try Wolff gunsprings. www.gunsprings.com

All they have is magazine springs for the 10

Anyone else?

[ott1]

http://www.davidtubb.com/ar-15-cs-extractor-ejector-spring-set

[ott1]

Are you using the little 'D' shaped rubber ring that Armalite upgraded to?
That was their fix for weak ejection.

That's the extractor spring not the ejector spring. The ejector spring is much longer.

[problemchild]

http://www.davidtubb.com/ar-15-cs-ex...tor-spring-set

Even in your link it says "15"

I have a 10 as in AR-10 which is 308

Yes I see alll the parts for the ar-15 and I see NONE for the AR-10 which is why I am asking here...

Tubb Precision CS AR-15 Extractor/Ejector Spring set

[problemchild]

Are you using the little 'D' shaped rubber ring that Armalite upgraded to?
That was their fix for weak ejection.

Yes=fail not working

[Arisaka]

You know, I can't seem to find one. This may sound hokey, but have you considered putting a detent down the hole first, then putting the spring in? That would give the spring extra force, especially if it's just a test to see if it would help. I dunno, I would try it.

[problemchild]

You know, I can't seem to find one. This may sound hokey, but have you considered putting a detent down the hole first, then putting the spring in? That would give the spring extra force, especially if it's just a test to see if it would help. I dunno, I would try it.

I guess I will have to do that. It doesnt seem like anyone makes a spring not by name anyways.

Thanks

[ott1]

Who made the dual ejector bolt?