Saiga 12 Safety install problem

[brantly04]

Putting the gun back together after conversion.


I have the modified bolt hold open from carolina shooters.


I can get the safety in but when I try to turn it down towards the bottom of the shotgun it won't budge.

it seems to be rubbing here


I have taken the dremel to the safety to try and see if I can take a little off but no dice. Am I juts being a wuss with the dremel or did I install the BHO wrong?

I can try to take pictures but it's pretty dark.


Sorry for the noob question


Here is a poor picture of the safety ... you can see where i did some grinding.

[SJgunguy24]

When you get the bho in there, pull it towards the discon and rotate up. Then install the selector and rotate down. The bho will slide down into the slot and hook the spring on the shelf. The other way is install the selector first but my finger are too big to get everything in there with the selector in place.