canted gas block or front sight base

[bodiebill]

When repositioning a canted GB or FSB, after removing pins and repostioning what is the procedure for re drilling and piining?

[thedrickel]

The procedure is, you drill it and pin it.

[Nathan Krynn]

If you do not have a good jig then I would say let someone who does do it. That is how it was canted in the first place.

Assuming you mean an AR.

[kendog4570]

If you do not have a good jig then I would say let someone who does do it. That is how it was canted in the first place.

Assuming you mean an AR.

This.

[glock21fan]

Use the gas tube to line it up

[subijitsu]

If you dont have the tools or resources to redrill it you could tap the holes in the fsb and use 4 loctited set screws. Ive done it on a couple builds and it is stronger than it sounds.