Unconfigured Ad Widget

Collapse

Question regarding threadlocker compound on a barrel (temperature issue)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Whiterabbit
    Calguns Addict
    • Oct 2010
    • 7602

    Question regarding threadlocker compound on a barrel (temperature issue)

    First, I don't want to talk about locktite color, it's not needed. I'll talk in terms on strength and viscosity when possible. (I have medium strength red, color is absolutely meaningless)

    So here's the deal. Gun is a stainless single action, and the ejector housing screw loosens under recoil. I'd like to lock that down, and tightening to the limit of "ogre-tightening" won't keep it from backing out.

    I'm not gonna ogre-tighten it either and risk stripping out the barrel.

    -------

    So I'd like to try a threadlocking compound. But they seem to say thhey de-lock at temperature. Barrels get damn hot.

    So it seems to me like high strength wouldn't really be high strength because of the thermal cycling. But I worry about using a high strength compound. Meanwhile, I have concerns that a medium won't hold at ALL because of the same thermal cycling.

    Does anyone have a product recommendation (high strength, medium strength, or a locktite chemical number) for threads on a barrel?

    Thanks,
  • #2
    gunboat
    Veteran Member
    • Apr 2008
    • 3288

    Why don't you just give one of them a try? All it can do is come loose. Which apparently it does now.
    I really doubt you will produce barrel heat hot enough to melt/damage the threadlocker. If I recall the "loctites" are generally good to about 300 degrees.
    my tuppence

    Comment

    • #3
      kendog4570
      Calguns Addict
      • Dec 2008
      • 5180

      What gunboat says.

      Red loctite breaks down at 400+ degrees. None of them hold for beans, if you dont clean the surfaces first.

      Comment

      • #4
        Fatstackz
        Senior Member
        • Jun 2011
        • 571

        Be careful with the red high strength, it is usually requiring a torch for us to remove. The blue 242 is a servicable thread locker. I have no idea what temps a barrel would reach on your normal outing but I doubt it gets hot enough to dissolve the loctite. I use 242 with out problems on sights.

        The important step is cleaning the parts of all oils. Normal IPA alcohol is NOT good enough in most cases, Acetone or denatured alcohol is what we normally use.

        The other thing to bear in mind is loctite anerobic, meaning it never cures until there is an absence of air between close fitting metal surfaces.
        Last edited by Fatstackz; 09-02-2011, 3:20 PM.
        "Don't make the same mistake twice or you might never get to them all."

        Comment

        • #5
          joelukehart
          Senior Member
          • Oct 2008
          • 977

          Surefire uses Rocksett by Flexbar on the suppressor adaptors. Flexbar claims 2000 degrees F.

          Comment

          Working...
          UA-8071174-1