underfolder question

[Domingo]

Question does the underfolder from
a Bulgarian milled receiver fit a stamp
receiver thanks
I'm changing my draco pistol to rifle
I'm also permanent installing a fakecan

[SJgunguy24]

Question does the underfolder from
a Bulgarian milled receiver fit a stamp
receiver thanks
I'm changing my draco pistol to rifle
I'm also permanent installing a fakecan

You should look into getting a complete stamped uf assembly with the trunnion. That rear trunnion on the Draco is rock hard and will need some of the holes drilled.

[Domingo]

The trunnion has the holes their
all ready for the under folder
but I was thinking about buying
one of the $109 bulgerian kit from apex
and using the underfolder and parting out
The rest

[thedrickel]

How many holes does the trunnion have on each side for the stock? 3 on the left and just the one big one on the right? Or 3 on each side?

[Domingo]

It has big one in each side
and 2 small ones in each side
so 3 per side

[nicoroshi]

I see where thedrickel is going with this.
Some underfolders have locks on both sides, and some only on one side.
From your description it sounds like a double locking mechanism stock you'd need.

[SJgunguy24]

I see where thedrickel is going with this.
Some underfolders have locks on both sides, and some only on one side.
From your description it sounds like a double locking mechanism stock you'd need.

The Dracos are kinda funny, I've seen a ton of them and some have all the holes, some have all the holes on one side, some with no holes, and those are some of the hardest trunnions I've ever worked with. Sounds like he has all of the holes, that's good. Your gonna burn up a bunch of bits if they didn't have all the holes.

[AIMSMALL]

Hey Domingo, I'm not sure about the underfolder question, the other guys who answered would know for sure though.

Check out my AK muzzle brakes as an option for doing Draco conversions though. Links in my sig

[bigbob76]

The trunnion has the holes their
all ready for the under folder
but I was thinking about buying
one of the $109 bulgerian kit from apex
and using the underfolder and parting out
The rest

I thought those kits were all gone?

[SJgunguy24]

I thought those kits were all gone?

Those are the milled kits https://www.apexgunparts.com/product...oducts_id/1463, in stock.

[bigbob76]

Those are the milled kits https://www.apexgunparts.com/product...oducts_id/1463, in stock.

I was better off when I thought those were all gone. Thanks a lot SJ