I hate POSPs

[Ryan in SD]

I have two of them. I dont like either of them. I bought one as broken and I was a dope and broke the lense on another one, but the reason why I hate them is because the reticle moves and theres no easy way of zeroing the impact near the center of the scope.

/rant

What should I put on my PSL? I think I'm done with POSPs.

[Peter.Steele]

The reticle moves on PU scopes too, but you can still manage to get the point of impact near the center of the glass.

Are there screws on the elevation knob? With the PU scope, you can set the reticle location and then change the knob to show whatever range you want for the BDC. 250-300 meters in the center of the glass works well, is easy to achieve.

[Ryan in SD]

The reticle moves on PU scopes too, but you can still manage to get the point of impact near the center of the glass.

Are there screws on the elevation knob? With the PU scope, you can set the reticle location and then change the knob to show whatever range you want for the BDC. 250-300 meters in the center of the glass works well, is easy to achieve.

All I know about adjusting is that you can't get bullet strikes in the middle of the glass. Is that correct? I heard people have to shim or otherwise ghetto rig their mount if they want it closer to center. Also theres a little rotation a few degrees which also would be a pita to fix.

Any thoughts or ideas?

[J.S.Riesch]

Kind of late, but hope this helps....Adjustments should be the same. It worked on my PSL scope

[arga]

OK, this is really late but when I first read this post I remember that there was a Weaver rail mount for the PSL but I couldn't remember where I found it. Well, I found it again.

I can't get the direct like to work but go to:

http://www.redstararms.com/

...and search for "PSL RSA Rail system"

[Ryan in SD]

I got my black posp to line up by milling off some of the mount at a aleight angle. Now the cross hairs are vertical with no indication of a cant. Thank you baby jesus.

Testing out the PSL before I park it then duracoat and flash hider.