Unconfigured Ad Widget

Collapse

Anodizing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pklin1297
    Veteran Member
    • Sep 2006
    • 3287

    Anodizing

    Hello,

    Can anodizing (like on AR receivers) be blasted off, or does it have to be chemically stripped?
    NRA Member, CAPRC Member
  • #2
    elsolo
    Veteran Member
    • Jan 2006
    • 4798

    You are better off doing it chemiaclly.
    Media blasting will give you a more uneven surface, you'll not notice until you try to polish it or whatnot.

    One easy home method to remove anodizing is Easy-Off over cleaner and Scothbrite. It takes some elbow grease, and rubber gloves. Practice on something unimportant, like an old mimimag flashlight body.

    Comment

    • #3
      Riodog
      Banned
      • Feb 2006
      • 1127

      While easyoff works okay, If you're thinking of having it re-anodized or if you have an anodizer close by, let them strip it for you as it will come out nicer.
      Just my experience from years of doing boat parts.
      Rio

      Comment

      • #4
        pklin1297
        Veteran Member
        • Sep 2006
        • 3287

        Since I will be recoating these receivers with Duracoat, I would actually prefer a more uneven surface for the Duracoat to "grab" onto. I will probably be sending them to Techplate in Anaheim to get done so I will talk to them also about this. Thanks all.
        NRA Member, CAPRC Member

        Comment

        • #5
          ar15barrels
          I need a LIFE!!
          • Jan 2006
          • 57202

          Originally posted by pklin1297
          Since I will be recoating these receivers with Duracoat, I would actually prefer a more uneven surface for the Duracoat to "grab" onto. I will probably be sending them to Techplate in Anaheim to get done so I will talk to them also about this. Thanks all.
          Just a warning about spray-on finishes and AR receivers...
          Don't strip the anodizing or the dry lube from the INSIDE of the upper receiver.
          Don't spray any finish INSIDE the upper receiver.

          I have helped guys fix their uppers after they did this.
          The paint had to all be removed from the inside of the receiver.
          You need the anodizing to give the aluminum a hard "skin" for the carrier to slide on.

          If you want to blast the outside of the receiver prior to duracoat, have-at-it, but mask the inside and certainly don't chemically strip it.
          Randall Rausch

          AR work: www.ar15barrels.com
          Handguns: www.handgunbarrels.com
          Bolt actions: www.700barrels.com
          Foreign Semi Autos: www.akbarrels.com
          Most work done while you wait on a scheduled shop visit.

          Comment

          • #6
            pklin1297
            Veteran Member
            • Sep 2006
            • 3287

            Thanks Randall... I won't make that mistake again spraying paint on the inside, as I've learned from my first painted AR...

            This set of upper and lower receiver however were already inproperly chemically-stripped so I will have to ask the plater to strip it completely then re-anodize in clear so I can apply any color to the outside easier. I find out with painting the last receiver that black anodizing requires a lot of paint to cover.

            What blasting media is required to remove anodizing?
            NRA Member, CAPRC Member

            Comment

            Working...
            UA-8071174-1