Removing obstructions from barrel

[Romanski]

Hi Guys,

I was trying to get the ogive measurement last night and pushed the bullet a bit harder than normal with my Hornady gauge. I take out the modified case and gauge and then give the rifle a few thumps and the bullet usually comes out, well not this time. So I look around for my long rod to get down the 26" barrel and I can't find it. So I take a wooden dowel that was laying around and try to use it to push the bullet out the chamber. Well that didn't work and I guess the dowel broke inside (ohh s***). I try to get the dowel out but it is stuck in the barrel as well, and I can't grab it now. I got a longer rod and try to hammer everything out but it seems the wooden dowel is now jammed on itself when it broke so everything is nice and tight about 1/2 down the barrel. I put some lube inside to try to soften things up and hopefully trying to force it out again.
Any good advice on how to get this stuff out of the barrel?

Thanks,
Roman

[kendog4570]

I can fix it. PM Me.
Ken

[6mmintl]

Kendog can do it! anything from squib load bullets to nut pics.

[Romanski]

I had to sacrifice one cleaning rod to remove obstacles and then about one hour of cleaning but it worked. Took out the Savage this weekend got <.5 moa in cold windy conditions. I'm surprised how much abuse the barrel took with the pounding I gave it. Thanks to everyone and especially kendog for the great advice.

Highly recommend kendog!