FAL party?

[hollowpoint67]

anyone having one of these in socal?

I know the AR platform and want to transition to the FAL so im looking for some Jedi elders to show me the ropes.

[E-120]

I am interested as well.

[jamesob]

i have built one and to be honest if i ever build another, i will pay the 125 that entreprise charges to assemble it.

[GM4spd]

I can't install a barrel or locking shoulder but can check headspace and
assemble the rest.I am here in SOCAL, Pete

[straykiller]

ive been interested in building one for quite some time now

[hollowpoint67]

anyone else?

[Diamond1]

I've got the tools and built 6-7 if someone needs some help. I'm in Long beach.

[aerospace90248]

I've got the tools and built 6-7 if someone needs some help. I'm in Long beach.

FAL BP!!

[straykiller]

FAL BP!!

im down

[novalondon]

I have parts kits for Aussie inch without the barrel and receivers. I also have complete minus locking shoulder Imbel kits with chrome lined barrels. Both kits are refinished,
Imbel kits have Entreprise type 3 receivers that have matching serials to the kits. Both kits have all the 922r parts already there.

[Diamond1]

When and where?

[_Z_]

When and where?

probably since you built some before you can setup a when and where

[Diamond1]

Here's the tools I have and will need in addition to small tools:
-receiver wrench
-barrel vice
-head space gauges
-dremel to remove rec stub if still on barrel.
Headspace is determined by the locking shoulder and you may have to order a different size depending on barrel and receiver.
I'll get all the tools together if some can host the event at the garage or shop. We will need a workbench with a good vice!

[_Z_]

Here's the tools I have and will need in addition to small tools:
-receiver wrench
-barrel vice
-head space gauges
-dremel to remove rec stub if still on barrel.
Headspace is determined by the locking shoulder and you may have to order a different size depending on barrel and receiver.
I'll get all the tools together if some can host the event at the garage or shop. We will need a workbench with a good vice!

There we go, the ball is rolling now!

Once you guys find the room, I would start another thread about the BP.

[edog11]

I can host but im a probably too far north Santa Maria , CA