Unconfigured Ad Widget

Collapse

need ak help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lokote
    Member
    • Jun 2009
    • 253

    need ak help

    i just bought a romanian underfolder kit and i need some help since this is my first build. first, does it really matter if the numbers dont match on the whole kit because the barrel that came with the kit doesnt match the rest, and second, if anyone knows of any build parties that are happening late this month or next month, please let me know
  • #2
    bigthaiboy
    Veteran Member
    • Apr 2007
    • 4795

    You must have just bought a kit from Centerfire. If the barrel and bolt do not match, you MAY find it won't headspace correctly. You won't really find that out until you can start lining up your demilled front end (barrel & trunnion) into the receiver and bolt.

    Check this very forum for build parties. They don't happen on a monthly basis in your area, so just keep checking back and sign up for one when when gets hosted in your area. BPs only happen around once or twice a year, in certain areas. They tend to have limited places, so if you're slow to sign up, you might get left out.

    Life can make you do many things, even kiss a man with a runny nose.

    Comment

    • #3
      lokote
      Member
      • Jun 2009
      • 253

      so would it be better to just return the kit and get one with matching serial numbers or is there a way to fix the headspace if there turns out to be a problem with it?

      Comment

      • #4
        Wyseguy
        Senior Member
        • Jan 2007
        • 1204

        Originally posted by lokote
        so would it be better to just return the kit and get one with matching serial numbers or is there a way to fix the headspace if there turns out to be a problem with it?
        Yes, and yes (but sometimes it's not easy, so see answer # 1)

        Comment

        • #5
          lokote
          Member
          • Jun 2009
          • 253

          could i get it fixed for under 100 bucks?

          Comment

          • #6
            MrNiceGuy
            Senior Member
            • Dec 2007
            • 2428

            Numbers matching kit is gonna be $250+ (unless you get SUPER lucky, doubt it because all the senior AK guys here are vultures....hehe).
            Non number matching is buildable, just finish one last week, but yah, headspacing is a pain.
            Personally I say just build it at a build party.
            Might as well get use to it since matching barrel kits are drying up, so start learning now.

            Comment

            • #7
              HUTCH 7.62
              In Memoriam
              • Aug 2006
              • 11298

              Originally posted by MrNiceGuy
              Numbers matching kit is gonna be $250+ (unless you get SUPER lucky, doubt it because all the senior AK guys here are vultures....hehe).
              Non number matching is buildable, just finish one last week, but yah, headspacing is a pain.
              Personally I say just build it at a build party.
              Might as well get use to it since matching barrel kits are drying up, so start learning now.
              Damn I paid 89 bucks for my #'s matching romy g kit like 3 years ago.
              Some say that he once mooned two prostitutes just for a round of drinks, but wasn't surprised by the reply......They call him, the Hutch
              Some say that he rode a dirtbike 7k miles across the country and that he once applied Bengay to his own testicles for a mere $50............They call him, the Hutch -Top Gear

              http://media.liveauctiongroup.net/i/...CCAB7CE8D70F60

              Comment

              • #8
                416stroker
                Senior Member
                • Sep 2007
                • 742

                Headspacing is not hard. Its rather easy. The hardest part is drilling or reaming the barrel pin.

                Comment

                • #9
                  WOOLEY BOOGER
                  Junior Member
                  • Nov 2009
                  • 34

                  speaking of drilling the barrel pin. whats the best way (once you get it headspaced) to mark and drill the barrel for pin?

                  Comment

                  Working...
                  UA-8071174-1