She wont feed

[skscj]

AES-10B feeds the round into the flat area outside the chamber. Any ideas anyone? If i carefully grind down the angled area that feeds the round into the chamber, whatcha yall think?

She was sent back to Century once with alot of hassle from Century Arms.

[PolishMike]

if you press up and forward on the mag does it feed better?

It may be a mag position issue, the safety stop may be too thick.

[skscj]

Ive tried 10rnd, 30 rnd, even my 75rnd drum, all the same. Tried moving the mag up and dowd, no go.

[sspen003]

Is this a homebuild?

I have seen a bunch of surplus mags with wierdo sizes. some too fat and wont fir in the magwell and others that need to be ground down a bit. Prolly just the mags

[uxo2]

More info on the rifles history...


She was sent back to Century once with alot of hassle from Century Arms

WHY...

[skscj]

Bought new from DDs Ranch, didnt work right, was sent to Century, they did something, not sure. Worked for about 100 rounds and is doing the samething as before.

[DB2]

Hollow point ammo? I had an ak that hated hollow point. It would jam every other round into the end of the barrel. FMJ worked every time.

[TURBOELKY]

looks like the shell casing is jamming into the front trunnion. Can you take a picture without the magazine in without a round, and the magazine out. You'll get alot more help. I'm no pro at all, but I had a feeding problem with my home build pistol..resolved. It would f' up the shell casings right at the rim, a little grinding fixed it...and some good mags.

[HotRails]

if you press up and forward on the mag does it feed better?

It may be a mag position issue, the safety stop may be too thick.

Im with you on this one, remember the parts kit this thing was built from was at one point in a rifle that worked correctly.. so. Look at how the mag is fitting in between the lower rails. Is it possible that at some point the lower rails have not been ground down enough to accomodate the magazine and it is sitting a little too low?

[blackberg]

Hollow point ammo? I had an ak that hated hollow point. It would jam every other round into the end of the barrel. FMJ worked every time.

same here, had one that would not feed hollow points, but would work perfectly with fmj,
-bb