Ace skeleton stock

[Henry Shooter]

Evening Gang
I have an RRA with an A-4 buttstock and I am in the process of putting on an Ace ARFX skeleton stock and find that the extension tube is too long by about 1/4". Am i overlooking something or do I need a different tube. Any help would be good. Thanks guys

[C.G.]

Are you trying to use the A-2 stock spacer, by any chance? If so, don't use the spacer.

[JagerTroop]

put up some pics, so we can get a better idea of what's going on

[Henry Shooter]

Howdy Guys
Ever have one of them moments where ignorance should be painful?? I just want to say for the record that I was not using the spacer for the A-2. What I found, after some sleep, is the close tolerance of the butt of the stock that fits into the buffer tube was real tight. So i had to do a light buff to remove the excess paint. Once I did that, viola..... And to think that today I joked with the boss that I dont eat crow. Anyway, Thanks for the support. That support is not required for the last part if this thread.
Thanks again.

[Bigballaizm]

What a difference a good nights sleep does...