Oil bottles

[fusionstar]

Where can I get a 2-4 oz oil squeeze bottle with a fine applicator tip. Its a pain to pull out the aerosol spray and get crap everywhere when working on guns.

[dustoff31]

I'm sure Brownell's or Midway would have what you are looking for.

[gunboat]

Get a hypodyrmic needle -- they are cheap and last a good while - The larger size needle can be ground slightly to make a larger opening if you need it -- my ha-penny

[Rust]

hypo's are good but some of the oils and solvents we commonly use for guns will attack the rubber orings and sometimes the plastic bodies themselves. Another thing I use is one of the "worm blower" bottles used for injecting air into worms for fishing. But that's also something you have to watch with solvents. Lately I've been using a glass eye dropper with a bent neck I picked up in makeup section at a dollar store both to get solvents into corners and to apply to cleaning patches so I don't get any gunk into the solvent bottle itself.

[NRAhighpowershooter]

I got mine from Tap Plastics....

[tdaughg]

I got mine from Tap Plastics....

yep, what your looking for is the hypo #25(green) or #49(red/pink). if the oil is water thin then the #25 is more than sufficient. if its like cold syrup then you'll probably need the #49. they run about $3 each.

http://www.tapplastics.com/shop/product.php?pid=409& green or pink needle tipped bottles.

[Technical Ted]

+2 for Tap Plastics

[G17GUY]

http://www.brownells.com/.aspx/pid=1200/Product/NEEDLE_OILER_BOTTLES

I have these from brownells. 3 for 6.99

Brownells is a site sponsor.

[kmca]

Please excuse the partial hijack, but does anyone know where to get just the cap for needle oilers?

[tdaughg]

Please excuse the partial hijack, but does anyone know where to get just the cap for needle oilers?

depending on the size and shape of what you need theres a company called "small parts inc" that has tons of that kind of stuff

http://www.smallparts.com/

[Greg Beck]

SEWING MACHINE STORES. They sell a killer oilers.

[motorhead]

Please excuse the partial hijack, but does anyone know where to get just the cap for needle oilers?

the ones on my platic glue bottles are just hypodermic needle caps. know anyone who works for a doctor or vet? don't think they sell just the cap. san diego plastics has just the needles and caps, w/o the bottles.