Unconfigured Ad Widget

Collapse

.308 broken case extraction

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mojaveman
    Senior Member
    • Jan 2010
    • 1130

    .308 broken case extraction

    Recently bought a .308 manually operated rifle and after getting it home I noticed it wouldn't chamber a round. Upon close inspection of the chamber, I saw that it had a broken cartridge case in it. I ordered an extraction tool from Brownell's because I might need it later but didn't want to wait so I took a M-14 chamber cleaning brush and inserted it tightly. I then took a section of cleaning rod and worked it back and forth a few times. With a slight rearward pull the broken brass came right out.

    Cool.
    Attached Files
    Last edited by Mojaveman; 08-08-2023, 6:31 PM.
    "Any honest and hardworking man is made better yet by a large bowl of good chili."
  • #2
    ar15barrels
    I need a LIFE!!
    • Jan 2006
    • 57103

    They usually do.
    I have never bought an actual broken case remover because I have yet to come across a broken case that would not come out with cleaning brushes I already have.
    Even a 30caliber brush or even a slightly larger 8mm or 338 brush will often grab inside the neck and pull the broken piece out.
    A pull-through bore snake run backwards through the barrel will usually do it too.
    Randall Rausch

    AR work: www.ar15barrels.com
    Bolt actions: www.700barrels.com
    Foreign Semi Autos: www.akbarrels.com
    Barrel, sight and trigger work on most pistols and shotguns.
    Most work performed while-you-wait.

    Comment

    • #3
      kendog4570
      Calguns Addict
      • Dec 2008
      • 5180

      GI type broken case extractors are useful when you are in the middle of a match and time is of the essence. Get you back in the match quick, fast, and in a hurry.

      When they are really stuck, neither these or bore brushes will get it. Cast with cerrosafe, or CAREFULLY run a tap into the brass and tap it out.

      Comment

      • #4
        Tyke8319
        CGN/CGSSA Contributor
        CGN Contributor
        • Nov 2013
        • 2105

        Originally posted by Mojaveman
        Recently bought a .308 manually operated rifle and after getting it home I noticed it wouldn't chamber a round. Upon close inspection of the chamber, I saw that it had a broken cartridge case in it. I ordered an extraction tool from Brownell's because I might need it later but didn't want to wait so I took a M-14 chamber cleaning brush and inserted it tightly. I then took a section of cleaning rod and worked it back and forth a few times. With a slight rearward pull the broken brass came right out.

        Cool.
        You've got head space problem OR brass which has been reloaded too many times. But I would suggest getting the head space checked.
        American soldier by choice. Made in America by the Grace of God.

        So, now it is ironic that the State whittles away at the right of its citizens to defend themselves from the possible oppression of their State.
        Judge Roger T. Benitez
        LCM's ruled legal 3/29/2019

        Comment

        • #5
          WOODY2
          Senior Member
          • Oct 2015
          • 1497

          Nice guy that sold you a malfunctioning weapon?

          Comment

          • #6
            zeneffect
            Member
            • Aug 2020
            • 124

            Sounds like someone over worked their brass, then separated the case and ran away in shame. Hope it was a bargain! I bet it shoots awesome

            Comment

            Working...
            UA-8071174-1