RRA 2 stage trigger.

[fusionstar]

I just installed the RRA 2 stage trigger I picked up from ryan at jksupplyco yesterday. The trigger is fine, everything is fine. It breaks clean. One problem. It is slightly rubbing on my safety lever on first stage. Creating a scratching feeling. My safety lever probably needs a little polishing. Before I do that, have any of you notice this?

[12gauge12]

I had to file down the flat on the safety lever to get mine to fit. I've heard its pretty common.

[dfletcher]

In the 1st stage there is usually some rubbing between the trigger & hammer of the RRA - just a bit and it's normal, sort of the trigger's way of telling you you're going through stage 1. Are you certain it's coming from the safety? The rear of the trigger does not rub up against the safety when it is being pulled, if it were interacting with the safety I think it would be more of a dead stop as it lifts up into it.

[ERdept]

Dremel with light touch and fine grit. It's one of the best triggers I have.

[xrMike]

Creating a scratching feeling. ... Before I do that, have any of you notice this?

Mine does same thing -- a very slight gritty feeling as I pull through the first stage. I'm talking barely noticeable through my finger tip.

At first I thought "not cool" but then realized it doesn't really matter. If anything, it lets me know positively that I am taking up the slack, and once I hit the end of the first stage, it always breaks very crisp after that, which is all that really matters to me.

It's a good trigger, but one of these days I will send mine to Holliger at WOA and see what his tuning does for it.

[fusionstar]

yea, its an awesome trigger. I have had rra 2 stage triggers in the past but the first stage have never felt like this. There was some feeling from the trigger to the hammer, but never from the trigger to safety.

If I lightly touch the safety while pulling the trigger, I can feel vibrations in the safety. I might just take it and a polish it down like others have done. We'll see after this week's range trip.

Its certainly an easy "fix" Its just one of those things that keeps getting pushed back..

"Ill do it tomorrow"
4 months later...
"Its done!"