Pressure Switch Attachment

[okdo]

Anybody know a good double stick tape for attaching a pressure switch on the handrail!

[sonofeugene]

I’d use black Velcro.

[mtenenhaus]

at a class i took a long time ago someone had epoxied a small magnet to the switch....i guess one of the small rare earth magnets.

assuming of course that the handrail is ferrous...or i guess you could place a magnet on each surface

I too have seen them wrapped with black velcro

[baih777]

https://magpul.com/m-lok-tape-switch-mounting-plate-insight-peq.html?mp_global_color=118

Or go to a hobby store that sells radio control. We use servo tape to hold the electronics in place.

[67Cuda]

I bought a small roll of this tape at Lowe's years ago. Not sure if they still carry it. It sticks very well, even outside. I've used it to mount house numbers to my metal mail box and my dash cams to the front window. I have more recently used it to mount a light/laser combo switch on my CZ Scorpion. So far, so good.

https://www.amazon.com/Double-HitLights-Mounting-Waterproof-Length/dp/B07TC16SZ7

[sofbak]

What's wrong with a small dab if gel-super glue?
If u need to move it, it will come off with a twist. And any dried glue residue us disolved wirh a little acetone.
BTEHO .....

[sonofeugene]

If you are going to stick something to the gun, be sure to thoroughly clean the gun with rubbing alcohol.

[Lonestargrizzly]

The magpul xtm rail covers have a channel to click the cable into.
And they only take up like 2-3 rail segments.

[okdo]

Like the Velcro idea the best!!!!!!!!

[mr goodguy]

Zip ties is what I’m using get the smaller ones it will look nice.

[okdo]

Thanks all for responding!!!!!!!

[pacrat]

WTH ever happened to Bondo and Duct tape?