AK Gunsmith in SoCal

[JPurp]

I need a side mount rail installed on a new Bulgy AK-74 and I am looking for an experienced AK armorer in LA, OC or San Diego.

Anyone have any references?

Thanks,

-JP

[bigbob76]

I need a side mount rail installed on a new Bulgy AK-74 and I am looking for an experienced AK armorer in LA, OC or San Diego.

Anyone have any references?

Thanks,

-JP

Which side rail are you using? If I see a reasonably priced one of good quality I'll put it on my 74 and you can see how it comes out.

[JPurp]

I am going to use the AM74M-P found here;

http://www.kalinkaoptics.com/detail.aspx?ID=510

This is my first AK and I don't have the tools to make the holes and rivet. I figured there would be a shop around here that would do the install.

-JP

[motorhead]

tantal makes a really nice screw on rail that can be attached with only a drill press and moderate skills. it's around $45 so i don't consider it real reasonable but i bought one anyway and i'm a cheap c/s.
AFAIK no one in so cal has yet come over to the dark side. i could be mistaken as i do my own work.

[ar15barrels]

I have drilled and installed the screw-mount variety, but I don't do rivets.

[motorhead]

i did mine in about a 1/2 hour after work. a little ratchet allen wrench helps on the one hard to reach screw.home depot sells a fine tooth patchet that accepte 1/4" driver bits, will save a little cussing.
i've got a bp-02 rail with a 3# night scope on it and it's rock solid.

[huckberry668]

I've seen Entreprise Arms work on AKs. Give them a call. www.entreprise.com or send matt@entreprise.com an email.

[JPurp]

Thanks for all the feed back. Given this is my first AK and I bough vs built I am going to leave this one to the pros.

I will check out Enterprise Arms.

Thanks,

-JP