REVERSE PLUG for SA TRP FULL RAIL

[eric1911]

Hello,

I am looking at the Wilson Combat reverse plug for SA TRP full rail.
It has collar-style rear profile.

https://shopwilsoncombat.com/Reverse-Plug-Full-Size-Supported-for-Bull-Barrel-Closed-End/productinfo/584/

Does anyone know if it fits the TRP?

[eric1911]

I also find an EGW one:

https://www.egwguns.com/government-reverse-plug-keyed-w-solid-end

[vinny_land]

Not sure on the two you listed, however this one from 10-8 is specific for the TRP.

https://www.10-8performance.com/reverse-spring-plug-trp-operator/

[eric1911]

Not sure on the two you listed, however this one from 10-8 is specific for the TRP.
https://www.10-8performance.com/reve...-trp-operator/

Thanks for your input.
I found that one too, but I would like to have collar-style to fill the gap under the bull barrel.

[alland]

I'm thinking that either the Wilson or The EGW would work, but the slide would probably need to be machined and the plug would need to be fit to your slide. If the TRP already has a bull barrel probably already has been cut for a reverse plug, but fitting to your slide will still need to be checked.