Boredom had set in

[offtrigger]

I'm new to all of this and since the parts will all be arriving soon I figure to build myself a basic wannabe gunsmithing workbench. I live in a small studio so portability is key. I'm pretty happy with it. Just figuring out mag mounts for my AR and 9. [emoji3577]

Sent from my HD1907 using Tapatalk

[Powder_Keg]

I dig it, nice job!

[D1911]

Nice job! That would make a sweet moveable reloading bench.

[offtrigger]

Thank u guys. I decided i will take and cut 2 more 4-5 inch planks in between my vice and where the rubber mat starts. The plan is have inter-changing planks for the caliber I'm working on. That and ammo storage. Peace!

[mtenenhaus]

very cool....great job

i use a thick piece of scrap leather in between the jaws of the vise. been able to do a lot of stuff that way without scratching anything.

might consider keeping ammo below or at least further away from the working surface.

[offtrigger]

@mten. thanks for the tip. I did order non jarring covers for them. One of the few items still coming.

Sent from my HD1907 using Tapatalk

[ReidT]

Looks nice and sturdy...good job

[Eatmyshade]

Is the top multiple planks or one solid piece?


Sent from my iPhone using Tapatalk

[offtrigger]

3 planks of thick pine

Sent from my HD1907 using Tapatalk

[pdaddy]

Looks good OP. I noticed your post count and when you joined. Welcome to Calguns! Great people here.

[offtrigger]

Thank you. I enjoy this site a lot. I've learned a lot already. Just sharing to some that might be newer than me. Happy Easter

Sent from my HD1907 using Tapatalk

[Aeneas]

Nice job! If you have the option, adding a way to secure the bench would be good. Could be a support structure that it bolts to on the wall or floor, but the bench can easily be disconnected for portability.

[The War Wagon]

Do those wheels lock?

Wouldn't want my work rolling around on me, but otherwise, it looks great!

[offtrigger]

Yup it locks. All 4 of them.

Sent from my HD1907 using Tapatalk

[VictorFranko]

Looks great OP, nice job.
Now add one of these (for worklight, dremel etc.)


and one of these and you're all set!