Unconfigured Ad Widget

Collapse

recoil spring

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • captn-tin
    Senior Member
    • Mar 2008
    • 817

    recoil spring

    Can someone tell me how to determine the correct recoil spring Power(?) for a 1948 vintage 1911 38 super. It will be used with +P loads and reloaded equivalents. Thanks for any help...captn-tin
  • #2
    CifaldiPrecision
    Vendor/Retailer
    • Aug 2012
    • 1806

    recoil spring

    14lbs is standard weight for a government model 38 super. 9mm is 11-14lbs with 40s&w being 17lbs. Hope that info helps.

    The primary job of the recoil spring is to strip the next round out of the magazine and properly chamber it.


    Sent from my iPhone using Tapatalk
    Last edited by CifaldiPrecision; 12-13-2019, 5:03 PM.
    Brett Cifaldi
    Specializing in 1911s
    Cifaldi Precision

    Comment

    • #3
      bruce381
      Senior Member
      • Feb 2009
      • 2452

      so start at 14 and maybe go higher if shooting +P.

      Comment

      • #4
        kcstott
        I need a LIFE!!
        • Nov 2011
        • 11796

        From Wolff

        Recoil Springs
        For Use in:
        Colt 1911, 1911A1, 1991, Government, MKIV and Gold Cup models
        Please see other caliber notes below



        Recoil springs for Colt 1911 series pistols are available in both conventional and variable power designs. Please refer to our FAQ section for information on conventional vs. variable design. Each Wolff recoil spring for Colt pistols includes an extra power firing pin spring. Recoil Calibration Paks are available offering a range of spring weights to tune your pistols recoil function. All springs are produced from Wolff proprietary HTCS spring material except as noted.

        The 3 most popular 1911 recoil springs are also available in chrome silicone material. While chrome silicone is an excellent material, it is a softer material and does not offer the tensile strength of our proprietary HTCS spring material (the material from which most of our springs are produced from). We now offer these spings due do customer requests.

        COLT 1911 FACTORY RECOIL SPRING NOTES
        1. Factory rating for super .38 & 9mm is 14 Lbs.
        2. Factory rating in .40 S&W is 19 Lbs.
        3. Factory rating for the Colt .38 Spl. Midrange is 14 Lbs.
        4. Factory rating for the Colt Ace .22 conversion is 14 Lbs.

        When ordering recoil springs for above caliber's, please take these differences into account.


        CONVENTIONAL RECOIL SPRINGS - .45 ACP

        Reduced Power...: 7, 8, 9, 10, 11, 12, 13, 14, 15 Lb.
        Factory Standard.: 16 Lb.
        Extra Power........: 17, 18.5, 20, 22, 23, 24, 26, & 28 Lb

        Comment

        • #5
          captn-tin
          Senior Member
          • Mar 2008
          • 817

          Thanks to all. Have a 14, and will get a 16 just in case. Thanks again, and a Merry Christmas to all...captn-tin

          Comment

          Working...
          UA-8071174-1