7068 2011 Frames

[Limited-Ten]

Any interest in some 7068 Aluminum 2011 frames? I'm running a few for a special project, and will have some leftover.

ADDED TO WEBSITE:
Purchase HERE

[Limited-Ten]

$249ish, 80%, 100% for FFLs/LEO.

[CSACANNONEER]

How about 100% built up as single shots?

[Limited-Ten]

ive done a few of those

[CSACANNONEER]

How much for a basic single shot 2011?

[repoman1984]

I'm still waiting on a 6" full dust cover in steel. You make one of those I'll put an order in the next day, also if you have any machined out of spec frames that have an extra 1" of dust cover I can cut/weld to a 5" dust cover on a 2011 80% frame I'd be interested as well.

[Limited-Ten]

I can supply a dustcover from a scrapped frame that you can use. I do it all the time actually.

[repoman1984]

Just put my order in thank you for telling me about the dustcovers.


At the moment I'm putting together on paper what I will need to purchase to Finnish my 2011 frame. I plan on purchasing the matrix rail cutting jig you supply as soon as I know what exactly my slide rail dimensions/cutters are. In your experience the frames you sell, do they required "decking" or shimming to the matrix rail cutting jig before cutting or are they ready to bolt/cut with the jig right out of the box? Thank you.

EDIT: to make it clear do I need one of these before I cut the rails

[Spyder]

I may be interested... More than a 50/50 chance I'd want one.

[Limited-Ten]

Just put my order in thank you for telling me about the dustcovers.


At the moment I'm putting together on paper what I will need to purchase to Finnish my 2011 frame. I plan on purchasing the matrix rail cutting jig you supply as soon as I know what exactly my slide rail dimensions/cutters are. In your experience the frames you sell, do they required "decking" or shimming to the matrix rail cutting jig before cutting or are they ready to bolt/cut with the jig right out of the box? Thank you.

EDIT: to make it clear do I need one of these before I cut the rails

I have yet to see the need for one. If any decking is required, a fine file or 320 grit stone should be more than enough.

I go over it here:

[Icypu]

$249ish, 80%, 100% for FFLs/LEO.

How can one order a 100% and what are the price and option? For example custom serial number etc.

[Limited-Ten]

LEO or out of state only for those.