123

[Ishootforblood]

123

[Kokopelli]

I did my telescoping stock to fixed stock mod with 5 cents worth of PVC pipe. No drilling required and easily reversible if I move out of state.

[scotty99]

I used one of these Strike Ind Stock Stops. Slick little part - cheap and easily reversible.

https://www.strikeindustries.com/shop/strike-industries-ar-stock-stop.html

Sent from my iPad using Tapatalk

[ar15barrels]

I use a 10 cent roll pin.
Drill a hole across the stock and buffer tube on the bottom area where the adjustment pin holes are at.
I only drill through one side of the stock but all the way through the aluminum so that the pin is installed blind.
If you want to remove it, you drill a little access hole on the other side to push the pin back out.

[Eat Dirt]

Always more than one way to skin a Cat !!

[edgerly779]

#46 aluminum pop rivet 1 minute and 10 cents cost.

[ar15barrels]

I did my telescoping stock to fixed stock mod with 5 cents worth of PVC pipe. No drilling required and easily reversible if I move out of state.

[ozarkpugs@gmail.com]

I like my kak pistol brace because it is solid and has no play or movement and I replaced the Allen Head screw with a knurled screw for quick adjustment . You could do the same here with several t nuts , it would be semi quickly adjustable but solid and quiet.

Sent from my Moto G Play using Tapatalk