OK never had a glock before so I built a 940c and noticed right off that the trigger pull is VERY inconsistent.
It's using a Lone Wolf lower completion kit with the 3.5lb connector but everything else stock.
WITH the Magazine out of the gun, at first when I was testing it would feel like you pull the trigger all the way back and when the movement stops, you keep mashing on it and it will finally release. I managed to measure it at 9-10lbs!! You can also pull the trigger to the point it stops moving rearward, then while starting to RELEASE the trigger, it will often release the striker.
WITH the MAG IN the pistol, it seems to pretty consistently pull at 3.5-3.75 lbs, and SOMETIMES it'll pull att 5.5-6lbs.
ALTHOUGH, when testing reset, the striker will often release as soon as the slide goes home (when I am being gentle with it). If I SLINGSHOT the slide (as if it were firing) the reset seems normal.
I took everything apart and gently polished all of the contact points and that's when I finally realized that having the mag in the pistol makes the trigger pull more normal, but it doesn't seem like it should be that way.
Did I do something wrong? why is the pull weight all over the place?
What is up with the difference with a mag in or not?
It's using a Lone Wolf lower completion kit with the 3.5lb connector but everything else stock.
WITH the Magazine out of the gun, at first when I was testing it would feel like you pull the trigger all the way back and when the movement stops, you keep mashing on it and it will finally release. I managed to measure it at 9-10lbs!! You can also pull the trigger to the point it stops moving rearward, then while starting to RELEASE the trigger, it will often release the striker.
WITH the MAG IN the pistol, it seems to pretty consistently pull at 3.5-3.75 lbs, and SOMETIMES it'll pull att 5.5-6lbs.
ALTHOUGH, when testing reset, the striker will often release as soon as the slide goes home (when I am being gentle with it). If I SLINGSHOT the slide (as if it were firing) the reset seems normal.
I took everything apart and gently polished all of the contact points and that's when I finally realized that having the mag in the pistol makes the trigger pull more normal, but it doesn't seem like it should be that way.
Did I do something wrong? why is the pull weight all over the place?
What is up with the difference with a mag in or not?

Comment