Unconfigured Ad Widget

Collapse

Serializing a Lower

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • HawkMan
    Senior Member
    • May 2016
    • 549

    Serializing a Lower

    What are some good low cost methods to serialize a lower yourself?

    I'm thinking of using a metal stamp kit.
    The only thing I'm worried about the metal stamping kit is if stamping a completed 80% lower could crack the frame.

    I'm also trying to avoid using a Dremel / handheld engraver because it would probably look pretty messy.
  • #2
    Trriemferent
    Senior Member
    • Sep 2012
    • 1252

    you can try etching...... Ive never done it but it should come out clean if done right

    Comment

    • #3
      croc4
      Senior Member
      • May 2005
      • 569

      Stamping does work ok....., the key is to stamp it before milling out the pocket, trying to stamp it after milling requires more work to support the area you are stamping.

      The other issue is keeping the stamps straight, if you don't get it right, it looks like a 3yrd old did it.


      croc4

      Comment

      • #4
        tiechshlime
        Senior Member
        • Jul 2012
        • 1032

        Here's a thread on etching.
        "When government fears the people, there is liberty.
        When the people fear the government, there is tyranny."

        Thomas Jefferson

        sigpic

        Comment

        Working...
        UA-8071174-1