Unconfigured Ad Widget

Collapse

Weak mag latch on Howa 1500

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • echo884
    Member
    • May 2009
    • 422

    Weak mag latch on Howa 1500

    Hi!
    Does anyone know how to fix a weak magazine latch on a Howa 1500 in .308? It's a sweet shooter. But almost every time I fire it, the magazine drops out. Fairly sure the mag latch spring is weak and it is unlatching under recoil. I've tried taping the mag to make it thicker, but I only lasts a couple reloads before dropping out again. This is for both the 5 and 10 rounders.
    Thanks!
  • #2
    baih777
    CGN/CGSSA Contributor
    CGN Contributor
    • Jul 2011
    • 5680

    With the mag inserted, look at the mag catch to make sure it's seated all the way against the mag. If Not, your mag might be hitting somewhere and keeping the mag from fully seating.
    Also try when you put the mag in, rock the mag front to back pushing in at the same time. Both mine work this way. I like a tight mag, so I leave it this way.
    Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
    I really miss the good old Pomona Gun Shows.
    I'm Back.

    Comment

    Working...
    UA-8071174-1