Need The Correct Forend for Harrington & Richardson...Resolved

[Bangzoom]

I cant see the model number for this H&R single barrel 12g with serial A4138xx

Anybody have the correct forend I can finagle from you?

Or point me to a site that has the one I need please

or if you know the model of this I can look more accurately for it

And No...I looked over the entire gun and saw no name for a model

[Pofoo]

have you tried looking at the Numrich diagrams to see if anything is close to what you have?

https://www.gunpartscorp.com/Manufacturers/HarringtonRichardson-33274.htm

[Bangzoom]

have you tried looking at the Numrich diagrams to see if anything is close to what you have?

https://www.gunpartscorp.com/Manufac...dson-33274.htm

yes..extensively...and google and bing and smoke signals

I just want to make sure in buying the right one and somebody here can enlighten me

[tr6guns]

Still looks like this one to me with the Snap on type forend, without seeing all the Internal and associate parts of course..

https://www.gunpartscorp.com/Manufacturers/HarringtonRichardson-33274/Shotguns-36451/SingleBarrelSeries-40892/148-41974.htm?page=4

[Bangzoom]

Still looks like this one to me with the Snap on type forend, without seeing all the Internal and associate parts of course..

https://www.gunpartscorp.com/Manufac...974.htm?page=4

yeah im eyeballing those right now...seems the complete ones are sold out...and if they were there its over 50 bucks...the gun isnt worth that...lol

[Bangzoom]

I ordered a cheap one...if it dont fit I will MAKE it fit...lol

[ar15barrels]

You can likely convert that barrel to take a screw-on forend by changing out the lug on the barrel to one that has a screw hole instead of a notch.

[G-Man WC]

Goto Graybeard.Com
Those guys are the H&R
NEF experts. I've spent a few
hours on the board.
-g

[Bangzoom]

You can likely convert that barrel to take a screw-on forend by changing out the lug on the barrel to one that has a screw hole instead of a notch.

Yep...Its a cheap gun so im going to weld a threaded stud on ....i dont care about pretty so...no biggy to me

and I wont overheat the barrel

[tr6guns]

If you need the Hardware here are the parts, might as well do it right. And it looks like they still have the bare hand guards for 30.00.

https://www.gunpartscorp.com/Products/279320.htm

[Bangzoom]

If you need the Hardware here are the parts, might as well do it right. And it looks like they still have the bare hand guards for 30.00.
https://www.gunpartscorp.com/Products/279320.htm

this beater gun isnt worth that much

[tr6guns]

Every Gun is worth that much, just depends who owns it.