AR builder and camo painting HELP

[gilroyguns]

Hi

Is there anybody who can showme how to build my first AR so i can learn how its done properly.

Also looking for someone or a company who charges a reasonable ammount to camo paint my AR that is local to the San Jose / SFO bay area .

Thanks in advance for any help from you guys.

[JamesY]

Are you just building a lower or the upper as well?

[gilroyguns]

I have a lower, the lpk and BB, buttstock with buffertube and a assembelled 22cal upper..........so basically the whole thing

[technique]

Its easy. Try the AR15.com how too. I'm in San Jose, limited on time at the moment. If you can't do it yourself ( you really should try ), I would be down to walk you through it...don't know when I would have the time, and I'm sure you want it built like yesterday...

[nwnguy]

Here's the link on barfcom: http://www.ar15.com/forums/topic.html?b=3&f=4&t=226782

[SJgunguy24]

PM. Me I can give you a hand, or head out to Panoche today. There will be plenty of calgunners out there to help out.

[JamesY]

Since it's just a lower and BB, it'll be VERY easy. Much easier than putting Ikea furniture together.

The tools you'll need are: set of punches, small hammer, black electrical tape (to protect the finish when installing the roll pin for the disconnector), and some CLP. I bet if you go to a gunshop that deals in OLLs, they could help you out as well.

Check this out:
Part I:



Part II:

[gilroyguns]

thanks guys........ i was at irvington doing a ppt and found out they assemble for 45 soiwill watch the guy there and onmy second one try and doit myself........But i do want to ,say thanks to all of you guys that offered to help.

Now all i need is someone to camo the AR for me ........any ideas or recommendations ?

[drawn]

They're not close so shipping would be the most cost effective;

https://www.armoryairbrush.com

[technique]

thanks guys........ i was at irvington doing a ppt and found out they assemble for 45 soiwill watch the guy there and onmy second one try and doit myself........But i do want to ,say thanks to all of you guys that offered to help.

Now all i need is someone to camo the AR for me ........any ideas or recommendations ?

CG member Drawn<----I think??? will do DC. Bay Area Gun Vault offers Duracoat, Ceracoat<<(spelling???) check it out.

[tpowers]

I'm in Walnut Creek and do Cerakote.
Let me know if there is anything that I can help you out with.