Here we go again...

[MosinVirus]

I have a carbon steel set if you want it.

[dwalker]

I have a carbon steel set if you want it.

Send pics? I am putting together a Single Stack USPSA pistol and would love a deal on a magwell.

[MosinVirus]

Send pics? I am putting together a Single Stack USPSA pistol and would love a deal on a magwell.

it is the same as what I am showing going on and into the frame above. The MSH and the mag guide. I will take a pic when I get home.

[mick_niller]

what hammer are you planning on using with the wilson grip safety?

[MosinVirus]

what hammer are you planning on using with the wilson grip safety?

A Concealment one. They sell the conceal beavertail and hammer

[MosinVirus]

Actually just got the concealment mag release also. I could have made one out of any of them, since it seems the only thing different is that the head of the mag release is very rounded. But this one is already done, so it will only inspire me to dehorning the rest of the pistol.

[MosinVirus]

That's even worse, no?

The 70PA Silver Braze looks pretty easy to apply to the soldering joint, and looks like it has flux built in... Makes me want to try the Gen 1 magwell now also...

Also, I don't know how that process will work with solder in the mix. I am pretty sure that if you wanted to melonite the frame with that magwell, it would probably have to be welded on, not soldered on.

[ar15barrels]

I am pretty sure that if you wanted to melonite the frame with that magwell, it would probably have to be welded on, not soldered on.

That's correct.

[MosinVirus]

Look at Brownells 70PA homogenized paste.

Thank you. Ordered.

[pklin1297]

Got a response from Stan's business manager today, I'll be able to get my hands on the Gen 2 relatively soon to play with. Also looking forward to getting that hole-drilling jig. I'm hoping that can also be used to solve the problems I've had with the officer frame.

By the way MV, how or what did you use to cut the portion of the mainspring housing channel away?

[MosinVirus]

I haven't yet. I figure that wall helps keep the frame in correct geometry until the magwell is on. What I will use should be of no surprise... a file or 2. Should be pretty easy

[pklin1297]

I haven't yet. I figure that wall helps keep the frame in correct geometry until the magwell is on. What I will use should be of no surprise... a file or 2. Should be pretty easy

I figured. Can't wait to see the result.

[MosinVirus]

I figured. Can't wait to see the result.

Congratulations on the Gen 2 magwell by the way. Is it official? Are you an authorized installer?

[pklin1297]

Congratulations on the Gen 2 magwell by the way. Is it official? Are you an authorized installer?

I will be as soon as I send a signed agreement back, which is basically a marketing and non-competence agreement of sorts; not hard at all it turns out. Just email them for this agreement and you too can be an installer. Like I said before, at $229 a set, the price of the part will be more of a hindrance most likely...

[MosinVirus]

Decided to blend a little.





The original fit was so decent that it only took about 20 min.