Unconfigured Ad Widget

Collapse

Building Galil Questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wireless
    Veteran Member
    • May 2010
    • 4346

    Building Galil Questions

    1. Is an AK fire control group compatible with a galil? If not, is there a website that sells an entire galil fire control group?

    2. Is the AR and SAR gas block compatible with each gun?

    Found out the answer was no, they are not compatible.

    3. Is there anyone who sells an folding stock assembly rather than individual pieces?

    4. I found a 13in 1:7 IMI barrel on gun broker, but I can't seem to find any other IMI barrels. I'm looking for a longer 1:9 or 1:7, not the 1:12 (if IMI even makes these).

    5. What rivet do I use for the bullet guide? I've been looking at a standard AK 7.62x39/5.56x45 bullet guide rivet...
  • #2
    Don Vito
    Member
    • Feb 2009
    • 317

    Yes you can use the AK FCG A little bit of filing will be needed to clear the opening at the bottom of the receiver if I recall correctly. No issues with the hammer or sear.

    Look for a stock on AK Files, Gun Raper also try 24 hour Tactical

    I can help you out with a 1/7 virgin IMI barrel PM me I have one left 18"

    AK bullet rivet is to short try IMI USA they also have some small parts and could have the correct rivet. If not make one
    Originally posted by gesundheit
    Don Vito made an offer than Knauga could not refuse

    Comment

    • #3
      Don Vito
      Member
      • Feb 2009
      • 317

      Wireless there is also a guy on youtube that put out 2 videos recently and does an outstanding job of explaining the corrections needed on the ORF/OWO receiver and general build process. name is Mel64D
      Originally posted by gesundheit
      Don Vito made an offer than Knauga could not refuse

      Comment

      • #4
        grossekatz
        Member
        • Mar 2008
        • 350

        Apex had stocks and barrels last time I looked.

        Comment

        • #5
          wireless
          Veteran Member
          • May 2010
          • 4346

          I'm having Randal do the headspacing. I'll be sure to mention the issue with the locking lugs not being exactly the same size. He's said he has done them before so I have faith he can do it.

          Comment

          • #6
            Don Vito
            Member
            • Feb 2009
            • 317

            Randal know the issues to look for
            Originally posted by gesundheit
            Don Vito made an offer than Knauga could not refuse

            Comment

            • #7
              wireless
              Veteran Member
              • May 2010
              • 4346

              I emailed IWI about the bullet guide rivet, but I don't know if I'll get a response. Randal told me that I'll have to find the correct rivet for him since he doesn't have any. I want to make sure I have the right one.

              Comment

              • #8
                Don Vito
                Member
                • Feb 2009
                • 317

                meh just get a proper sized rivet put it in a drill press and file it to have the correct taper. rivet in the guide then dremmal the dome off the top to be the proper conture of the guide.
                easy pessy
                Originally posted by gesundheit
                Don Vito made an offer than Knauga could not refuse

                Comment

                • #9
                  wireless
                  Veteran Member
                  • May 2010
                  • 4346

                  Okay cool, thank you

                  Comment

                  Working...
                  UA-8071174-1