lee pro 1000 question...

[phonso302]

I got my press loading ammo consistently. Only problem I am having is when loading final 2 rounds loose .01 on my oal end up with 1.14 Sometimes 1.13

as long as 3 rounds are in the shell pIate I get 1.15 Oal

i have tried adjusting the decapper and the powder thru die. And get the same issue. I even swapped out the seating die and had the same issue.

is .01 A big deal ? 9mm mixed brass/ 4.0 titegroup /cci primers/ 115gr xtreme/ oal 1.15

[Spyder]

Yeeup, Douglas is right. Absolutely nothing to worry about.

[phonso302]

So there isn't much pressure difference to worry about

[klewan]

It's not the dies, it's the unequal pressure on the shell plate that is cocking it to one side. Just shoot 'em.

[postal]

It's not the dies, it's the unequal pressure on the shell plate that is cocking it to one side. Just shoot 'em.

This.

[gregshin]

I get that on my 2 dillons 650 and 550 and my lee pro 1000 as well.